How to Repair a Garage Door

How to Repair a Garage Door

The garage door has two very important components. There’s the garage door itself and the garage door opener. Although repairs should be done on both these components, in this post we are going to largely focus on the garage door. We will give you a few tips on maintaining the garage door opener too. The great thing is that in most cases, if the garage door is faulty, simple DIY repairs can actually fix the problem.

Below are a few steps that you should take when you do Riverside handyman:

Step 1

The first thing you should do is to actually check the metal tracks. The tracks are found inside the garage. You will also see the mounting brackets that are designed to hold the tracks. The brackets need to be tight. If they are loose, tighten the bolts. Make sure you’ve also inspected the tracks for dents, flat spots, and crimps. If the track appears badly damaged, perhaps replacement will be better than handyman Riverside. You can also use a level in order to ensure that the tracks are aligned properly.

Step 2

The second step is all about cleaning. The tracks must be cleaned properly as part of routine maintenance. You can use a concentrated household cleaner to get rid of the dirt and grease that may have hardened around the track. Make sure you’ve also cleaned the rollers. Once this is done, use a dry cloth to wipe off the excess water.

Step 3

Check for loose hardware too and tighten where necessary. In case you have swing-up doors, your focus should largely be on the plates. Ensure they are tightened. If you have the roll-up doors, your main focus should be the hinges. Look at the screws and tighten them if needed. If the hinges are damaged, replace them.

Garage Door Maintenance

Even though regular handyman services Riverside CA is important in ensuring the door is working in fine condition, a regular maintenance routine is also necessary. This will help to increase the door’s longevity and limit the extent of damages.

Here are some of simple garage door maintenance tips to keep in mind:

Lubrication – One of the main causes of wear and tear in any garage door is poor lubrication. It’s advisable to lubricate all the moving parts on a regular basis in order to avoid issues. You can use white -lithium grease for this purpose.
Inspect the rollers – The rollers must also be inspected on a regular basis to ensure things are fine. The normal recommended inspection is twice a year.
Clear the tracks – The tracks are essential in any garage door and they need to be clear of debris all the time. If you have the time, you must clear up the track once every month just to be on the safe side.

handyman Riverside CA can help ensure your door is in good condition for a long period of time. The repairs are very simple and all it takes is a few hours of your time and a regular maintenance routine.

Comments are closed.